To Next Page

To Previous Page

8.4. Common copying setting

Change relevant setting with “copying setting menu” for better copying effect.

1. Press "Copy" and then "Menu" on control panel to enter the "Menu Setting" interface.

2. Press "OK" to enter the "Copy Setting" interface.

3. Press “direction key to select option to be set and press “OK key” to set option.

Note:

• The image quality, intensity, resizing and paper setting can keep valid after options are

set.

• Settings on all-in-one, clone, poster, collated copy and duplex copy will be restored to

defaults after completing the copying, switching among panel keys or rebooting the

machine.

8.4.1. Image quality

Select corresponding image quality mode for original document used in order to improve

copying effect.

There are 4 modes in total:

Auto: default mode, applicable to text and image originals.

Text + image: applicable to originals with mixed text and image.

Image: applicable to original image.

Text: applicable to original text.

Note:

• The image quality mode supports “automatic” mode only after “poster” and “collated

copy” are set.

8.4.2. Intensity

Adjust deep-light copying effect by setting intensity.

This printer supports "Manual Adjustment" and "Auto Adjustment" in color intensity. 5 levels for

manual adjustment and 3 levels for auto adjustment by default.

Pantum BM5100ADN Series User Manual

Questions and Answers: