16
3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed error,
and then load the paper into the tray print-side down.The automatic feeder tray can be loaded
up to 250 pages, 80g/m² paper.
4. Raise the output tray to avoid the printed paper from slipping and falling, or immediately
remove the printed document after the printing is complete.
• It is recommended that you raise the output tray to prevent the paper from slipping
and falling after printing. If you choose not to raise the output tray, we recommend that
you immediately remove the printed paper from the printer.
• If more than 250 pages (80 g/m²) are put inside the auto feed tray at one time, paper
jam or paper feed failure will be led to.
• If carrying out single-sided printing, please make sure that the side to be printed (the
blank side) is face down.
To Next Page
Loading...
Need help?
General