ELECTRIC COMPONENTS
16
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Removal of the horn.
- Remove the front upper shield panel (see
procedure 1).
- Removal of front lower shield panels (see
procedure 2).
- Remove the horn (1).
When refitting, locate the header tank positioning pins (A) and the window (B) in the rear shield
and in the radiator bracket.
Removal of the oil pump control unit.
Removal of the regulator.
Removal of the engine temperature
sensor.
Removal of the oil pump.
- Remove the storage compartment (see
procedure 4).
- Remove.
• Control unit (1).
• Regulator (2).
1
1 2