Name: PEUGEOT SpeedFight 3
Brand: PEUGEOT
Rating: 4 (1 reviews)

To Next Page

To Previous Page

SERVICE OPERATIONS

Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles

SERVICE OPERATIONS

Changing the engine oil

The engine must be drained when

it is warm to allow the oil to run

easier.

Put on protective gloves.

- Place the vehicle on its central stand on flat

ground.

- Remove the engine's oil filler cap (1).

- Remove the drainage cap and its

seal (2) and allow the oil to drip into a

recipient.

- Remove the strainer cap (3) and clean the

strainer.

- Re-install the filter cap fitted with a new seal.

Tightening torque: 15 Nm.

- Insert the drain plug fitted with a new seal.

Tightening torque: 20 Nm.

- Pour the required quantity of oil

corresponding to the manufacturer's

standards into the filler hole.

Quantity: 0.7 l.

- Start the engine and let it run for a short

while.

XXXXXX

*XXXXXXXXX*

Questions and Answers:

Need help?

Do you have a question about the PEUGEOT SpeedFight 3 and is the answer not in the manual?

PEUGEOT SpeedFight 3 Specifications

General