Name: PEUGEOT SpeedFight 3
Brand: PEUGEOT
Rating: 4 (1 reviews)

To Next Page

To Previous Page

SERVICE OPERATIONS

Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles

Rear brake linings

- Actuate the brake control lever and check

the position of the wear mark on the cam

tierod (A) compared to the mark (B) on the

engine housing.

- If the cam tierod mark is lined up with or

passes the wear mark on the engine

housing, the brake lining must be replaced.

- When it is no longer possible to adjust the

control tension nut, the brake pads are worn

(C).

Disassembly

- Remove the 2 nuts attaching the exhaust

flange to the cylinder.

- Disconnect the air hose from the exhaust (1).

- Remove the exhaust (2 screw).

Questions and Answers:

Need help?

Do you have a question about the PEUGEOT SpeedFight 3 and is the answer not in the manual?

PEUGEOT SpeedFight 3 Specifications

General