Sewing
Roller presser down after trimming
When this function is active, the roller presser is lowered after the trimming process.
10.04 Decorative seams
Decorative seams are designed as rotary programs. The program does not stop at the end
of the program and the thread is not trimmed. The program is repeated until the pedal is
brought backwards to the 2nd position ( pedal position 3 in chapter 7.03 Pedal ).
There is an example for programming decorative seams in chapter
11.14.02 Example for programming a decorative seam.
10.05 Program interruption
If the sewing of a program has to be interrupted ( e.g. in the case of a thread breakage ), the
function program interruption must be activated.
● When pressed once, the machine switches to manual SEWING.
● If you continue sewing manually the stitch length values will be taken from the seam
program ( symbol in display appears on a dark background ).
● By using the plus/minus keys you can select the seam section in which the seam
program is to be continued.
● When pressed a second time, you enter the selected seam section. Programmed
SEWING is continued.
10 - 5
To Next Page
Loading...
Need help?
General
