Programming
11 - 15
11.12 Bartack menu
In INPUT mode, values for start and end bartacks can be entered in this function after the
programming function has been activated.
● Select the bartack menu function.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 21
Double start-bartack
- Pressing this key once turns the function on or off.
- A double click of this key opens the menu for inputting the bartack parameters.
Single start-bartack
- Pressing this key once turns the function on or off.
- A double click of this key opens the menu for inputting the bartack parameters.
Double end-bartack
- Pressing this key once turns the function on or off.
- A double click of this key opens the menu for inputting the bartack parameters.
Single end-bartack
- Pressing this key once turns the function on or off.
- A double click of this key opens the menu for inputting the bartack parameters.
Summary of the input menus:
1 - START-BARTACK PEDAL- DEPENDENT
2 - SPEED
3 - STITCHES FORWARDS
4 - STITCHES REVERSE
1 - START-BARTACK PEDAL- DEPENDENT
2 - SPEED
4 - STITCHES REVERSE
2 - SPEED
3 - STITCHES FORWARDS
4 - STITCHES REVERSE
2 - SPEED
4 - STITCHES REVERSE
Start bartacks are only sewn in the seam program if the trimming has
already been carried out. End bartacks are only sewn if the thread trimming
function has been activated.
All other bartack functions entered are optimized after the end of the program.
To Next Page
Loading...
Need help?
General
