Press OK again to finish renaming.
For more information on using the keyboard,
press
Keywords and look up Remote control, keyboard.
* Only for the remote control with keyboard
Picture format
If black bars appear on top and bottom or on both sides of the
picture, you can adjust the picture format to a format that fills
the screen.
To change the picture format . . .
1. While watching a TV channel, press
to open
the Picture format menu.
2. Select a format from the list and press OK.
The following format can be available according the picture on
screen . . .
Basic
- Fill screen
- Fit to screen
Advanced
- Last setting
- Shift
- Zoom
- Stretch
- Dot : dot
- Undo
Text / Teletext
Text options
In Text, press
OPTIONS to select the following . . .
Freeze page
To stop the automatic rotation of subpages.
Dual screen / Full screen
To show the TV channel and Text alongside each other.
T.O.P. overview
To open T.O.P. Text.
Enlarge
To enlarge the Text page for comfortable reading.
Reveal
To unhide hidden information on a page.
Cycle subpages
To cycle subpages when these are available.
Language
To switch the group of characters that Text uses to
display correctly.
Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text setup
Text language
Some digital TV broadcasters have several Text languages
available.
To set your primary and secondary Text language . . .
1. Press
and select Setup and press OK.
2. Select Channel settings > Language.
3. Select Primary Teletext or Secondary Teletext.
4. Select your preferred Text languages.
5. Press
, repeatedly if necessary, to close the menu.
Text 2.5
If available, Text 2.5 offers more colours and better graphics.
Text 2.5 is activated as a standard factory setting.
To switch off Text 2.5 . . .
1. Press TEXT.
2. While watching the teletext, press
OPTIONS.
3. Select Text 2.5 > Off.
4. Press
, repeatedly if necessary, to close the menu.
Menu language
To change the language or the TV menus and messages . . .
1. Press
î‚¥
and select Setup and press OK.
2. Select TV settings > General settings > Menu
language and press OK.
3. Select the language you want and press OK.
4. Press
î‚š
, repeatedly if necessary, to close the menu.
Audio languages
If the TV channel broadcasts multiple or dual audio languages,
you can select your preferred audio language.
1. While you watch TV, press

OPTIONS.
2. For digital channels, select Audio language. For analog
channels, select Alternate audio. Press OK to confirm
your selection.
3. Select from the available languages, then press OK.
Note:
If you have selected Alternate audio for analogue channels,
select between:
Main: Primary audio language or
SAP: Secondary audio language
About interactive TV
28
To Next Page
Loading...
Need help?
General
Weight and Dimensions
