Home Theatre System or audio system. With TV speakers, you
select where you want to hear the TV sound and how you want
to control it.
If you select Off, you permanently switch off the TV
speakers.
If you select On, the TV speakers are always on.
With an audio device connected with HDMI CEC, you can use
one of the EasyLink settings.
If you select EasyLink, the TV sends the TV sound to the
audio device. The TV will switch off the TV speakers
when the device is playing the sound.
If you select EasyLink autostart, the TV will switch on the
audio device, send the TV sound to the device and
switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you can still
switch to TV speakers or device speakers in the Picture
and sound menu.
To set the TV speakers . . .
1. Press
and select Setup and press OK.
2. Select TV settings > Sound > Advanced > TV speakers.
3. Press
(right) and select Off, TV speakers, EasyLink or
EasyLink autostart.
4. Press
, repeatedly if necessary, to close the menu.
To switch speakers directly . . .
1. While watching TV, press
OPTIONS and select
Picture and sound.
2. Select Speakers and select TV or Amplifier (audio
device).
3. Press
, repeatedly if necessary, to close the menu.
Clear sound
With Clear sound, you improve the sound for speech. Ideal for
news programmes. You can switch the speech improvement on
or off.
To switch on or off . . .
1. Press
and select Setup and press OK.
2. Select TV settings > Sound > Advanced > Clear sound.
3. Press
(right) and select On or Off.
4. Press
, repeatedly if necessary, to close the menu.
HDMI ARC
If you do not need an Audio Return Channel (ARC) on any of
the HDMI connections, you can switch the ARC signal off.
For more information, press
î„“
Keywords and look up HDMI
ARC.
Audio Out format
With Audio Out format you can set the audio out signal of the
TV to fit the sound processing capabilities of your Home
Theatre System.
For more information, press
î„“
Keywords and look up Audio
Out format.
Audio Out levelling
With Audio Out leveling you can level the sound volume of the
Home Theatre System with the volume of the TV when you
switch over from one to another.
For more information, press
î„“
Keywords and look up Audio
Out leveling.
Audio Out delay
If you set an Audio sync delay on your Home Theatre System,
to synchronise the sound with the picture, you must switch off
Audio Out delay on the TV.
For more information, press
î„“
Keywords and look up Audio
Out delay.
Audio Out offset
If you cannot set a delay on the Home Theatre System, you can
set a delay on the TV with Audio Out offset.
For more information, press
î„“
Keywords and look up Audio
Out offset.
TV placement
As part of the first installation, this setting is set to either On a
TV stand or Wall mounted.If you have changed the placement
of the TV since then, adjust this setting accordingly for best
sound reproduction.
1 - Press
and select Setup and press OK.
2 - Select TV settings > General settings > TV placement and
press OK.
3 - Select On a TV stand or Wall mounted and press OK.
4 - Press
, repeatedly if necessary, to close the menu.
22.4
Ambilight
Ambilight
Only for TVs with Ambilight.
Ambilight style
69
To Next Page
Loading...
Need help?
General
Weight and Dimensions
