53
Basic Setup
04
Input function
Input Terminals
HDMI Audio Component
USB-DAC
<a>
TV
OPT-1
<b>
CD
ANALOG-1
<c>
TUNER
PHONO
MULTI CH IN
<a>
k
ADAPTER PORT
a SC-LX88 only
b When ARC at HDMI Setup is set to ON, it is not possible to make assignments to the TV input’s Audio In terminals.
c Only the TV and CD inputs can be assigned to ANALOG-1.
Operation Mode Setup
This receiver is equipped with a great number of functions and settings. The Operation Mode feature is provided
for users who find it difficult to master all these functions and settings.
One of two settings can be selected for the Operation Mode: Expert and Basic.
! With factory default settings, the on-screen display will be output from all HDMI output terminals and
displayed on any TV connected via HDMI cable. You can change where the screen is output in the
MAIN/HDZONE (page 109 ) and HDMI output (page 84 ) settings.
Important
! Many of the settings and functions cannot be selected when the Operation Mode is changed to Basic.
1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and
then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
2 Select ‘Operation Mode Setup’ from the HOME MENU.
3 Select the Operation Mode setting you want.
! Expert (default) – Users can set all the functions by themselves.
! Basic – Only certain basic settings can be operated. The settings that can be operated are shown below. They
can be set as necessary by referring to the operating instructions.
Operable settings/items Descriptions Page
HOME MENU
Full Auto MCACC
Makes high precision sound field settings easily.
50
Input Name
Input names can be changed as desired for easier use.
52
Input Skip
Inputs not being used are skipped (not displayed).
52
Software Update
Updates to the latest version of the software.
108
Network Information
Checks the receiver’s IP address.
107
Audio Parameters
MCACC
(MCACC preset)
Selects your favorite MCACC preset memory.
79
DELAY
(Sound Delay)
Adjusts the delay time of the overall sound.
79
S.RTRV
(Auto Sound Retriever)
Plays compressed sound with high sound quality.
79
DUAL
(Dual Mono)
Dual monaural audio setting.
79
INPUT ATT
(Input attenuate)
Decreases the input signal level to reduce distortion.
79
V.SPs
(Virtual Speakers)
Automatically complements virtual surround speakers (surround
back, front height and front wide) to create a sound field.
79
V.SB
(Virtual Surround Back)
Creates a virtual surround back channel sound for playback.
79
V.HEIGHT
(Virtual Height)
Creates a virtual height channel sound for playback.
79
V.WIDE
(Virtual Wide)
Creates a virtual wide channel sound for playback.
79
V.DEPTH
(Virtual Depth)
Plays with a sound field suited for 3D images.
79
Other functions
ALL (INPUT SELECTOR) Switches the input.
56
VOLUME +/–, MUTE Use to set the listening volume.
56
LISTENING MODE
Selects your favorite listening modes.
63
PQLS
Plays using the PQLS function.
77
PHASE (Phase Control) Plays with phase shifting in the low range corrected.
66
PHASE (Full Band Phase Control)
The Full Band Phase Control feature calibrates the frequency-phase
characteristics of the speakers connected.
67
SOUND RETRIEVER AIR
Switches the input to ADAPTER PORT and plays compressed sound
with high sound quality.
62
iPod iPhone DIRECT CONTROL
Switches the input to iPod/USB and sets the mode allowing operation
from the iPod.
57
4 When you’re finished, press RETURN.
You will return to the HOME MENU.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
