Customizing SoundStructure Designs
5 - 23
Once the ungated signal is selected in the matrix, the decision of which
ungated type of the signal is used is made on the channels page on an input by
input basis.
As described in Chapter 2, there are four different types of ungated signal pro-
cessing paths that may be selected for each input. The different signal
processing paths for the four ungated signal types are summarized in the fol-
lowing table.
The default ungated type depends on the type of input signal as shown in the
following table.
Ungated Type Summary
Bypass No signal processing on the audio
channel.
Line Input Equalization, dynamics processing, AGC
Conferencing Equalization, echo and noise cancellation,
non linear processing, dynamics
processing, AGC
Sound Reinforcement Equalization, echo and noise cancellation,
feedback elimination, dynamics
processing, AGC
Signal Type Default ungated type
Microphone channels Sound Reinforcement
Non microphone channels Line input
To Next Page
Loading...
Need help?
General
