Linking Multiple SoundStructure Devices with OBAM
7 - 9
Creating a New Project
A new SoundStructure Studio project may be created for a multi-device
system as easily as creating projects for a single SoundStructure device. The
steps required to create a file and upload to a collection of SoundStructure
devices are listed below.
1. Create a new project using SoundStructure Studio 1.2 or higher by
selecting the desired inputs to and outputs from the system in steps 1 and
2 of the design process.
2. On step 3 of the design process, either select the default equipment (if it
matches your target devices) or manually change the equipment to match
the equipment that you already have. Add the equipment in the order
that you have the devices OBAM linked together. In the previous
example this would mean adding first a C16, then a C12, and finally a C8.
3. On Step 4 of the design process, select Offline configuration.
4. Once the project has been completed, confirm the actual wiring of the
system to ensure the physical input and output wiring matches the
wiring page.
Physical Wiring
As described in Chapter 3, when multiple SoundStructure devices are linked
together the numbering of the physical channels will be sequential across the
devices. The wiring page will show the wiring information including both the
local input/output numbering and the global input/output numbering as
To Next Page
Loading...
Need help?
General
