11 - 1
11
Integrating The Polycom Touch
Control with SoundStructure Systems
This chapter describes how to integrate the Polycom Touch Control with a
SoundStructure system. For information about using the Polycom Touch Con-
trol with an HDX system, see the latest version of the Administrator’s Guide for
Polycom HDX Systems.
Polycom Touch Control and SoundStructure Systems
The Polycom Touch Control is an easy-to-use touch sensitive user-interface
device that integrates directly with a SoundStructure system for control of the
audio conferencing system including dialing SoundStructure telephony inter-
faces, muting audio, and adjusting volume. SoundStructure events are used to
customize the behavior when muting and adjusting volume.
The Polycom Touch Control can also integrate directly with a Polycom HDX
system. When controlling an HDX system, a SoundStructure system con-
nected to the HDX system over Conference Link2 will be controlled indirectly
via the Conference Link2 integration. See Chapter 6 for additional information
about Conference Link2.
SoundStructure System Requirements
SoundStructure Firmware
To use the Polycom Touch Control with the SoundStructure system, the
SoundStructure system must have firmware version 1.3.3 or later.