Polycom SoundStructure C8 User Manual

Using Events, Logic, And IR
9 - 31
Step 1: Add the logic output that will be used to drive the relay
In this example, an analog logic output called “Phone Connect Status” was
created.
Step 2: Create the Event
In this example, the phone connect parameter is mapped to the logic output.
If the phone is off hook (phone_connect = 1) then the logic output will allow
current to flow and the relay will energize. The invert option is not necessary
in this example.

Polycom SoundStructure C8 Specifications

General

Brand	Polycom
Model	SoundStructure C8
Category	Conference System
Language	English