Video Call Settings
Video Call Settings
You can update video settings to change the way video calls display on your Polycom Trio system.
Note that if you update settings during a call, the new settings apply to the next call and not the current
call.
Note Some of the features described in this section require access to the Basic settings menu.
If your phone requires a password to access the Basic settings menu, contact your
system administrator for assistance.
Related Topics
Video Calls on Polycom Trio Systems
Set the Call Rate for Video Calls
You can set the maximum call rate to use for a video call and the selected call rate applies to your next
video call.
Your system administrator can set a maximum call rate for video calls, and you cannot select a call rate
above this limit. You can choose a call rate between 128 kbps and 768 kbps. The default setting is 512
kbps.
Procedure
1 Navigate to Settings > Basic > Call Rate.
2 From the Call Rate screen, select the maximum call rate you want to use for video calls.
Change Video Clarity
You can change the Target Frame Rate to improve video clarity.
The Target Frame Rate sets how smoothly your video displays. You can set a rate between 5 (least
smooth) and 30 (smoothest). The default rate is 30.
Procedure
1 Navigate to Settings > Basic > Video.
2 Select Camera Settings > Target Frame Rate and tap Up or Down to adjust the frame rate.
Set the Video Layout for the Meeting
During a video call, you can choose how video from meeting participants display on the monitor.
Printed from Polycom, Inc. (http://documents.polycom.com) Page 48
To Next Page
Loading...
Need help?
General
