Chapter 4 Software Utilities
SE-8134 SERIES USER MANUAL
4.6 Installing LAN Driver Utility
Enhanced with LAN function, SE-8134 supports various network
adapters. To install the LAN Driver, follow the steps below:
1 Connect the USB DVD-ROM device to SE-8134 and insert the
driver disk.
2 Enter the LAN folder where the driver is located
(depending on your OS platform).
3 Click Autorun.exe file for driver installation.
4 Follow the on-screen instructions to complete the installation.
5 Once the installation is completed, shut down the system and
restart SE-8134 for the changes to take effects.
For more details on the installation procedure, refer to the
Readme.txt file that you can find on LAN Driver Utility.
To Next Page
Loading...
Need help?
General
