Remove the power supply of the DIGI-GPRS modem from panel when installing or changing
the SIM card. Check the SIM card credit regularly.
LANModem (DIGI-LAN)
The DIGI-LAN fits inside the PCX. It allows communications with the PyronixCloud and
HomeControl+ App via a standard Ethernet internet connection cable and also has the following
features:
• Send Alarms to the ARC: With the DIGI-LAN it is possible to send alarm events to the monitoring
station via Contact ID IP and SIA IP protocols.
• Program the panel remotely via secure network connection: With the DIGI-LAN it is also possible
to program the PCX remotely via a secure internet connection and use of the InSite UDL
software.
• Program the panel remotely via the PyronixCloud.
• Status LEDs: The DIGI-LAN features the industry standard Ethernet/LAN cable connection
status and activity LEDs.
• Micro SD slot: For future features in development.
Wi-Fi Modem (DIGI-WIFI/XA)
The Wi-Fi modem card (DIGI-WIFI/XA) fits inside the PCX. It allows communications with the
PyronixCloud and HomeControl+ App via a Wi-Fi internet connection and also has the following
features:
• Send Alarms to the ARC: With the Wi-Fi modem card it is possible to send alarm events to the
monitoring station via Contact ID IP and SIA IP protocols.
• Program the panel remotely via secure network connection: With the Wi-Fi modem card it is also
possible to program the PCX remotely via a secure internet connection and use of the InSite UDL
software.
• Program the panel remotely via the PyronixCloud.
Connecting to the Upload/Download Software
The PCX can be programmed by a keypad or the UDL InSite Software provided free of charge. You
can download the UDL InSite Software from www.pyronix.com.
The connection between control panel and UDL software can be done in the following ways:
• Serial connection (RS232)
• PyronixCloud connection (DIGI-GPRS, DIGI-LAN, DIGI-WIFI/XA)
30 PCX Installation Guide 102017852 - V01
To Next Page
Loading...
Need help?
General
