Qlogic QL45212 User Manual

User’s Guide—25Gb Intelligent Ethernet Adapter
QL45212
iii BC0154503-00 C
Removed “Running the Dell Update Package from
the Command Line” topic.
“Installing Drivers” on page 9
Updated the list of RHEL source and kmod RPM
package names. Added SLES source and kmod
RPM packages.
“Linux Driver Software” on page 10
Updated Step 1, first bullet command
rpm -e kmod-qlgc-fastlinq-<version>.
<arch> to
rpm -e qlgc-fast-
linq-kmp-default-<version>.<arch>
“Removing Linux Drivers in a non-RoCE Environ-
ment” on page 12
Added new Step 1 “Type the following command to
get the path to the currently installed drivers: mod-
info <drivername>.
Replaced references to rmod qede and rmod
qed with modprobe -r qede.
Added new note “If the qedr is present, use mod-
probe -r qedr instead.”
“To remove Linux drivers in a non-RoCE environ-
ment:” on page 12
Added new Step 1 “Type the following command to
get the path to the currently installed drivers: mod-
info <drivername>.
Deleted reference to “modprobe -r qede,
modprobe -r qed, and depmod -a.”
“To remove Linux drivers in a RoCE environment:”
on page 13
Updated Step 2, first bullet command
rpm -e kmod-qlgc-fastlinq-<version>.
<arch> to
rpm -e qlgc-fast-
linq-kmp-default-<version>.<arch>
“Removing Linux Drivers in a RoCE Environment”
on page 13
Added reference to CentOS on Step 2, second bul-
let, under “For RHEL”
“Removing Linux Drivers in a RoCE Environment”
on page 13
Updated Step 1 command
rpm -ivh RPMS/<arch>/kmod-qlgc-fast-
linq-<version>.<arch>.rpm to
rpm -ivh RPMS/<arch>/qlgc-fast-
linq-<version>.<arch>.rpm
Updated Step 2 rmpbuild commands for RHEL
and SLES to use -bb instead of -dd.
Updated Step 3 command
rpm -ivh RPMS/<arch>/kmod-qlgc-fast-
linq-<version>.<arch>.rpm to
rpm -ivh RPMS/<arch>/qlgc-fast-
linq-<version>.<arch>.rpm
“Installing Linux Drivers Using the src RPM Pack-
age” on page 14

Qlogic QL45212 Specifications

General

Brand	Qlogic
Model	QL45212
Category	Adapter
Language	English