5–Preboot Adapter Configuration
Getting Started
39 BC0154503-00 C
Getting Started
During the host boot process, you have the opportunity to pause and perform
adapter management tasks using the Human Infrastructure Interface (HII)
application. These tasks include the following:
Displaying Firmware Image Properties
Device Level Configuration
NIC Configuration
Data Center Bridging Configuration
NIC Partitioning Configuration
To start the HII application:
1. Open the System Setup page for your platform. For information about
launching the System Setup, consult the user guide for your platform.
2. In the System Setup page, select Device Settings, and then click Finish.
The HII screens in this chapter are representative and may not match the
screens that you see on your system.
To Next Page
Loading...
Need help?
General
