Step 9: Save all cameras: If you want to setup other cameras,
please repeat from step2 to step 8. In “Image Setup” menu, press
“Confirm” key to save all cameras parameters. Press “Cancel” button
or [ESC] key to abort.
Select “Off” option for “View Tampering”, you can delete the view
tampering area.
Note: Only one view tampering area can be setup for each camera.
The view tampering area can not be copied. If the schedule is
modified, you must reboot the device to make the parameters into
effective.
5.9 Video Loss Alarm
When the video cable or camera has something wrong, the video image is
lost. If you enable video loss alarm, in such case, DVR will make alarm.
Step 1: Enter into “Image Setup” menu:
Step 2: Select camera: Use [Ç] [È] keys to select one camera.
To Next Page
Loading...
General