Chapter 5 Parameters Setup Guide
Only the users that have “Parameters Setup” right need read this chapter.
When the following parameters are modified and saved, you must reboot
the DVR to make the new parameters take into effective. Other
parameters do not need to reboot.
z Any network parameters
z Stream type, resolution and record schedule
z External alarm sensor type
z View tampering alarm schedule
z Video lost alarm schedule
z Motion detection alarm schedule
z External alarm schedule
z Alarm output schedule
z Transaction
z RS232 work mode
z Change video output standard
5.1 Administrator and Password
When DVR is left from factory, there is one default administrator. The
name is “admin” and password is “12345”. The name can not be changed,
while the password can be.
Password modification
Press [MENU] key, in the login dialog, select the username as “admin”,
use [Æ] key, move cursor to password edit box, input “12345”, press
“Confirm” to enter into administrator menu.
To Next Page
Loading...
General