5.12 Recording Setup
In main menu, there is an icon named “Recording”. You can enter into
recording menu as following:
“Recording” menu description:
If HD Full: There are two options: “Overwrite” and “Stop recording”. If
you select “Overwrite” option, when all HDDs in DVR are full, DVR will
overwrite the earliest recorded files and continue recording. If you select
“Stop recording” option, when all HDDs are all full, DVR will handle it as
“Hard Disk Full” exception, please refer to chapter 5.17 for exception
menu.
Select Camera: Here all channels are listed. You can use [Ç] [È] keys to
select one.
Stream Type: There are two options, one is “Audio&Video” stream and
the other is “Video” stream only. If you want to record video and audio,
please select “Audio&Video” option, otherwise you can select “Video”
To Next Page
Loading...
General