Processing Examples3.3
Applying Postage for [Normal] Mail
Use the following settings to apply Postage for [Normal] Mail.
How to Set Postage for [Normal] Mail
The procedure below outlines steps in a recommended sequence to process your mail.
• As mail requirements quickly vary, some settings may not be necessary, or their
order may vary.
• You must begin with selecting the Type of imprint to gain access to the additional
options and be able to run your mail (normal is default).
To set the imprint quickly, consider using job memories. The
memories store imprint characteristics together with rates and,
if activated, charged account. See Job Memories on page 196.
Required settings:
1. Make sure you are on the home screen of the [Normal] type of imprint.
The home screen indicates weight, postage amount and the currently selected
rate as illustrated below.
36
| Page 36 | Jun-21-2021 09:24 |
3
Processing Mail
To Next Page
Loading...
