8. KEYS
Press to switch the weighing device on/off, keep the key pressed for about
1 second.
Function key, press to change the working mode.
Press to send the weighing result to a printer or a computer.
Upon pressing + key combination, functions
of given keys change. Detailed information concerning use
of the above key combination is to be found further down
this manual.
9. START-UP AND OPERATION
9.1. Levelling
It is necessary to level the scale, do it by turning its feet. Keep turning the feet
until the air bubble takes central position:
9.2. Connecting the Scale to the Mains
The weighing device can be connected to the mains only with a power supply
that comes standard with the particular model. Nominal voltage of the power
supply (specified on the power supply data plate) has to be compatible with the
mains nominal voltage.
Procedure:
Connect the power supply to the mains. Plug it to the power supply socket
(back side of the scale housing).
To Next Page
Loading...
Need help?
General
