RADWAG C315 Series User Manual

24
12.3. Ambient Conditions
Parameter relating to ambient and environmental conditions of the workstation.
Enter this parameter and set 'nStAb' value if the ambient conditions are
unfavourable (air drafts, vibrations).
Procedure:
 Enter <P2.rEAd / 2.3.Enut> submenu.
 Press key, parameter values are displayed successively one by
one: nStAb – unstable, StAb – stable.
 Press key to confirm, next go to the home screen.
12.4. Autozero Function
'Autozero' function has been designed to enable automatic control and
correction of zero indication. This guarantees precise weighing results. There
are, however, some cases when this function can be a disturbing factor for the
measuring process, e.g. very slow loading of the weighing pan (load adding,
e.g. pouring, filling). In such a case, it is recommended to disable the function.
Procedure:
 Enter <P2.rEAd / 2.4.Aut> submenu.
 Press key, parameter values are displayed successively one by one:
YES – autozero function enabled, no – autozero function disabled.
 Press key to confirm, next go to the home screen.
12.5. Tare Function
'Tare' function has been designed to enable setup of appropriate parameters
for tare operation.
Procedure:
 Enter <P2.rEAd / 2.5.tArE> submenu.
 Press key, available values are displayed successively one by one:

RADWAG C315 Series Specifications

General

Brand	RADWAG
Model	C315 Series
Category	Scales
Language	English