RADWAG C315 Series User Manual

9
4.2. Chair Scales
Take the device out of the packaging and then:
Install footrests:
 Make sure that the pin for coupling
of the footrest fits the opening entirely
(keep pushing the pin until it resists).
 Couple the footrest to the pin.
 Screw the bolt fixing the footrest, make
sure it sticks out.
Position the footrests vertically prior to
weighing, this is to make way for the
patient who is to sit on the chair.
During weighing, the footrests must take
horizontal position to serve as a support for
the weighed person legs.
During weighing, the footrests must take
horizontal position to serve as a support for
the weighed person legs.
Bolts
Tighten the bolts

RADWAG C315 Series Specifications

General

Brand	RADWAG
Model	C315 Series
Category	Scales
Language	English