RADWAG C315 Series User Manual

32
16.4. Automatic Shutdown
Parameter allowing to set time interval, in [min], after which the weighing
device shuts down automatically. If the indication is stable during the declared
time interval, the device goes automatically off. Shutdown function is inactive
and the device cannot be turned off when any of the processes is ongoing
or when the menu is operated.
Procedure:
 Enter <P7.Othr / 7.4.t1> submenu.
 Press key, parameter values are displayed successively one by one,
where: nonE – function disabled, 1, 2, 3, 5, 10.
 Press key to confirm, next go to the home screen.
16.5. Date and Time
Parameter allowing to set current date and time and to specify date and time
format.
Procedure:
 Enter <P7.Othr> submenu and change the settings. Refer to the below
table:
Parameter
Description
<7.5.SdAt>
Enter this parameter to set current date, where the date format is
YYYY.MM.DD
1)
.
<7.6.Stnn>
Enter this parameter to set current time, where the time format is 24H.
<7.7.FdAt>
Enter this parameter to set date format. Values: 1 - DD.MM.YYYY,
2 - MM.DD.YYYY, 3 - YYYY.MM.DD (set by default), 4 - YYYY.DD.MM.
<7.8.Ftin>
Enter this parameter to set time format. Values: 24H
2)
(set by default), 12H
2)
.
1) - Date format: Y – year, M – month, D – day.
2) - Time format: 12H – 12-hour format, 24H - 24-hour format.
16.6. Default User Settings
Parameter allowing you to restore default operator settings.
Procedure:
 Enter <P7.Othr / 7.9.dFLu> submenu, text <Cont?> is displayed
(Continue?).

RADWAG C315 Series Specifications

General

Brand	RADWAG
Model	C315 Series
Category	Scales
Language	English