22
Notice:
Balance zeroing determines a new zero point treated by balance as precise
zero. Zeroing is possible only in stable states of the indication.
8. BALANCE CALIBRATION
To ensure very high accuracy of weighing, periodical entering to memory
correction factor of balance indication referring to standard mass is required; it
is so called balance calibration. In WLT balances it is inaccessible for user. The
procedure of calibration can be performed only by authorized services of the
manufacturer.
Fig. 8. Internal setting of calibration
1 – main menu number
2 – cursor
3 – group of parameters
4 – status bar
5 – parameter number
6 – parameter name
7 – parameter value
8 – parameter description
Notice:
In verified scales calibration can be accessed from the user’s menu. Calibration
should be performed with no load on the pan!
To Next Page
Loading...
Need help?
General
