RADWAG WLT L Series User Manual

29
No and name
parameters
Value of
parameters
No and name
parameters
Value of
parameters
01 Speed of
transmission
0 : 2400;
1 : 4800;
2 : 9600;
3 : 19200
02 Parity
0 : none;
1 : par;
2 : odd
07 Interval
Interval determines
stroke (how often)
balance sends
through RS232 joint
display indication. It
is determined
according to formula
value of parameter x
0.04 s = time of
stroke-
interval.Values from
1 to 9999 can be
introduced
03 Data bits
1 : 7 bits;
2 : 8 bits
08 Min mass Give value
04 Stop bits
1 : 1 bit;
2 : 2 bits
09 Print stab
0 : no;
1 : yes
05 Transmission
control
0 : none;
1 : RTS/CTS;
2 : XON/XOFF
10 Gap
Determines gaps
between successive
variables sent
through RS 232 joint
06 Automatic
printout
0 : none;
1 : continuous;
2 : with gaps
3 : by stab
11 Printer type
0 : receipt(EPSON)
1 : Citizen CLP
2 : Zebra
After setting appropriate parameters return to weighing mode with saving
changes.
13. PRINTOUTS
This function is used to configure standard and non-standard printouts. (see
chapter 23).

RADWAG WLT L Series Specifications

General

Brand	RADWAG
Model	WLT L Series
Category	Scales
Language	English