42
VAT Value Addend Tax
Tare Value of tare
Validity Validity term (number of days 0 -1000)
Date+A Constant date assigned to assortment
To change any parameter press arrow to the right than inscribe the value.
Changes are confirmed by ENTER or canceled by ESC. Leaving editing field
by ESC. Returning to main level by ESC again.
17.1.4. Contractors database
While in Counting pieces mode press F key on balance keyboard or F2 on PC
keyboard. Set < ►> next to „M1 04 Contractors DB”. After pressing right arrow
you will see the list of contractors (up to 500 records). Choice of contractors is
done by arrows up and down, however confirmation by arrow to the right.
however enter to edition arrow to the right.
You will see following parameters:
Name Name of material (28 characters)
Index 4 digits
Id 6 signs
Country 16 signs
City 28 signs
Code Post code (8 characters)
Street Name of street (28 characters)
TIN TIN number (12 characters)
Discount 0.00 to 99.99
Change of any parameter is done by pressing arrow to the right and next using
keyboard, enter an appropriate values. Changes are confirmed with ENTER
key or cancelled with ESC key. Exit from edition with ESC key. Exit on menu
level higher (again ESC key).
Notice:
After any changes in bases reload them while in counting pieces mode. If this
is not performed changes will not be visible (having chosen assortment e.g.
nails and performing changes in it e.g. “Min Pcs” parameter after return to
counting pieces mode reload assortment “nails”) This concerns all databases.
To Next Page
Loading...
Need help?
General
