RCA CPR 250 User Manual

-Mounting Your Camcorder on
an Optional Tripod
The Camcorder may be attached to a
tripod when you wish to make
recordings without holding the
Camcorder. This will keep the
Camcorder very steady and produce
excellent video results. Mount the
Camcorder onto a tripod by
attaching the mounting screw on the
tripod to the mounting hole on the
bottom of the Camcorder, as shown
at right.
•Using the Camcorder's
Shoulder Strap
Among the accessories packed with
four Camcorder is a shoulder strap.
The proper procedures for attaching
the shoulder strap is in the diagram
illustrated.
_ioul
_ Vi_ aa_r
The shoulder strap is designed to let
you carry the Camcorder from your
shoulder and-when you are ready to
record-bring the unit to shooting
position in one quick movement.*
Continued on next page
22

RCA CPR 250 Specifications

Power

power requirement	12 VDC
power consumption	9.5 watts

Camera

required minimum illumination	7 lux (0.7 foot-candle)
lens diameter	46 mm
color image sensor	solid state MOS imager

Weight and Dimensions

weight	4.4 lbs (2.0 kg)
dimensions	117 × 250 × 367 mm