1
3
4
NU692_7_G2-FRA.qxd 30/09/04 15:31 Page 2.33
J84 - MEGANE SCENIC - NU692-6
C:\Documentum\Checkout\NU692_7_T2-ENG.win 24/11/2004 20:04
- page 33
2.33
CRUISE CONTROL - SPEED LIMITER: limiter function (continued)
Exceeding the limit speed
In the event of an emergency
It is possible to exceed the limit
speed at any moment. To do this:
press the accelerator pedal firmly
and fully (beyond the “resistance
point”).
While it is being exceeded, the set
speed flashes on the instrument
panel.
When the emergency has passed,
release the accelerator pedal: the
speed limiter function will return as
soon as you reach a speed lower
than the limited speed before the
emergency.
Limit speed cannot be maintained
When the system cannot maintain
the limit speed (e.g. going down a
steep hill) the set speed flashes on
the instrument panel.
Switching the function off
The speed limiter function is
interrupted when you press:
- button 4, in which case the limit
speed remains memorised and the
message “stored” appears on the
instrument panel,
- switch 1, in this case the limit
speed is no longer stored, and the
warning light on the instrument
panel goes out to confirm that the
function has been cancelled.
Return to limit speed
It is possible to return to a stored
speed by pressing button 3 once.
The message “Limiter” appears on
the instrument panel.