1
2
1
4
3
NU692_7_G1-FRA.qxd 22/10/04 11:16 Page 1.72
J84 - MEGANE SCENIC - NU692-7
C:\Documentum\Checkout\NU692_7_T1-ENG.win 8/12/2004 16:55
-page84
1.72
EXTERIOR LIGHTING AND SIGNALS
Switching on the side
lights
Turn t he e nd of s ta lk 1 until the
symbol faces mark 4.
The instrument panel lights up and
the brightness can be adjusted using
wheel 2.
A warning light on the instrument
panel will light up.
Switching on the dipped
beam headlights
Manual operation
Turn the end of st alk 1 until the
symbol faces mark 4.
A warning light on the instrument
panel will light up.
Automatic operation (depending
on vehicle)
With the engine running, the
dipped beam headlights switch
themselves on or off automatically
depending on exterior brightness,
without the need to operate stalk 1
(position 0).
This function can be deactivated or
reactivated.
- To activate it, press button 3 for at
least four seconds. Two beeps and
the “Automatic lighting ON”
message confirm this action.
- To deactivate it, with the vehicle
stationary, press button 3 for at
least four seconds. A beep
confirms this action and the
message “Automatic lighting
OFF” appears on the instrument
panel.
If stalk 1 is operated, it overrides
and cancels the operation
temporarily.
Before driving at night, check that the electrical equipment is operating correctly and adjust the headlight
beams (if your vehicle is not carrying its normal load). In general, check that the lights are not obscured (by
dirt, mud, snow or objects which could cover them).
To Next Page
Loading...
Need help?
General
