PostScript 3 - Setting Up for Printing
6
1
[Job Log] Tab
This tab is used to adjust the settings for plug-in modules. The plug-in modules
are modules that provide additional functions that cannot be implemented by
the printer driver or PPD file.
Limitation
❒ These functions cannot be accessed from applications that use their own
printer driver, such as PageMaker, etc.
Note
❒ The settings adjusted using this tab are used until the values for the settings
are adjusted again.
❖
❖❖
❖ [User ID]
Enter the User ID to be displayed in Job History in SmartNetMonitor for Cli-
ent and SmartNetMonitor for Admin.
❖
❖❖
❖ [User Code]
Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of
users and allows you to check the number of sheets printed under each code
with SmartNetMonitor for Admin
The following table shows the tabs or menus where you can select this func-
tion.
Reference
For more information about using SmartNetMonitor for Admin, see the
Help file.
Various Types of Printing
This section introduces several printing examples from Windows 95/98 and Me.
Windows 98 is used for explanation purposes.
Reference
As printing can vary depending on the application, see the respective docu-
mentation that comes with the application regarding details on settings.
Printing on custom sized paper
It is possible to make settings for custom sized paper.
Note
❒ It is possible to register up to three custom paper sizes.
A
AA
A
Display the data to be printed.
To Next Page
Loading...
Need help?
General
