Facsimile Features
134
4
Authorized Reception
Use this function to limit incoming senders.
The machine only receives faxes from programmed Special Senders, and there-
fore, it helps you screen out unwanted documents, such as junk mail, and saves
wasting fax paper.
Note
❒ To use this function, program the Special Senders function, and then select
“On" in “Authorized RX" with “Reception Settings". See "Reception Settings",
and Parameter Settings" (switch 08, bit 2).
❒ Without programming Special Senders, the Authorized RX function will not
work, even if you select “On".
❒ You can select to receive only from programmed senders or receive only from
senders other than those programmed in User Parameters. See "Parameter
Settings" (switch 08, bit 2).
❒ If you select “Off" for “Authorized RX" in “Initial Set Up", settings are the
same as the Reception Settings.
❒ You can change Special Senders in the same way as you program them.
Reference
p.97 “Reception Settings”
p.125 “Parameter Settings”
To Next Page
Loading...
Need help?
General
