Facsimile Features
144
4
F Enter the horizontal size of the paper using the number keys, and then
press the {q} key.
Specify a horizontal size from 148 mm (5.9") to 600 mm (23.7"). You cannot en-
ter a size smaller than 148 mm or larger than 600 mm.
Each time you press [mm] or [inch], the units switch between “mm” and
“inch”. If you enter a length and change the units by pressing [mm] or [inch],
it is converted automatically (fractions are rounded off).
G Press [OK].
Deleting a Special Sender
This section describes how to delete a Special Sender.
Use this function to delete "Initial Set Up" of a Special Sender. The Bypass Tray
Paper Size can also be deleted.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [Program Special Sender].
D Press [Delete], and then select the Special Sender you want to delete.
E Press [Delete].
To cancel deleting a special sender, press [Do not Delete]. The display returns
to that of step
D
.
F Press [Exit].
G Press the {User Tools/Counter} key.
To Next Page
Loading...
Need help?
General
