Special Senders to Treat Differently
137
4
Programming/Changing Special Senders
This section describes how to program and change Special Senders.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [Program Special Sender].
D Check [Program / Change] is selected.
E Select the destination to program or change.
When programming a new Special Sender, press [*Not Programmed].
F Enter a destination name, and then press [OK].
Enter a destination name using Own Name or Own Fax Number.
G Press [Full Agreement] or [Partial Agreement].
H Select the item you want to program.
You must select only the item you want to program.
To cancel these settings, press [Cancel]. The display returns to that of step
E
.
I Press [OK].
A Special Sender is programmed.
To program another sender, repeat the procedure from step
E
.
J Press [Exit].
To Next Page
Loading...
Need help?
General
