Ricoh 8025e User Manual

System Settings
70
2
To delete the programmed LDAP server
This section describes how to delete the programmed LDAP server.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Program / Change / Delete LDAP Server].
D Press [Delete].
E Select the LDAP server you want to delete.
F Press [Yes].
G Press [Exit].
H Press the {User Tools/Counter} key.
Programming the LDAP server
This section describes how to specify the LDAP server settings.
To enter an identification name
This section describes how to enter a identification name.
A Press [Change] under “Name”.
Register a name for the LDAP server that will appear on the server selection
screen of the LDAP search operation.
B Enter the server’s identification name.
C Press [OK].
To enter a server name
This section describes how to enter a server name.
A Press [Change] under “Server Name”.
Register the LDAP server’s host name or IP address.
B Enter the LDAP server name.
C Press [OK].

Ricoh 8025e Specifications

General

Brand	Ricoh
Model	8025e
Category	All in One Printer
Language	English