110
Error Messages
* Error messages are indicated by an “E.” before the number. Press [Display] button, and you can cancel the error message.
Indication
Meaning
There is not sufficient free memory in the save destination.
Delete unneeded files (Songs or Registration Sets) you’ve saved in internal memory and try again.
An error occurred during writing. The internal memory may be corrupted.
Initialize the internal memory.
The file is unreadable. The data format is not compatible with the FP-4.
Data was not called up in time for playback of the song.
After waiting several seconds, you may be able to play back the song by pressing the [Play] button again.
The internal memory capacity of the FP-4 is full.
The FP-4 cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the FP-4.
A MIDI cable has been disconnected.
Connect it properly and securely.
A MIDI transmission error has occurred.
Check the MIDI cable and connected MIDI device.
There may be a problem with the system.
Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the
Roland service center.
Indication
Meaning
User Song. Stores recorded performances (p. 66, p. 67, p. 71).
Recorded Chord Progression Pattern
The “.” in the display indicates that there is performance material already recorded (p. 67, p. 71).
Internal (preset) song number (p. 22)
Song number of the internal memory (p. 27)
Rhythm number (p. 48)
This appears when you attempt to delete a recorded song (p. 26, p. 65, p. 75).
Registration
Function
This appears when a song with a pickup (a song that does not start on the first beat) is played back.
V-LINK function is On (p. 92).
Panel Lock function is On (p. 92).
FP-4-e.book 110 ページ ２００７年５月２４日 木曜日 午後７時１０分
To Next Page
Loading...
Need help?
General
