Roland FP-4 User Manual

36
Performing
You can apply a reverb effect to the notes you play on the keyboard. With the reverb
effect, you obtain a pleasant reverberation, making it sound as if you were performing
in a concert hall or similar space.
fig.Panel-Reverb.eps
1.
Press the [Reverb] button so it’s lit.
Try fingering the keyboard.
The reverb effect is applied to the entire tone.
Turning Off the Reverb Effect
1.
Press the [Reverb] button so its light is turned off.
You can select from ten levels of depth for the reverb effect.
1.
Hold down the [Reverb] button and press the [-] or [+] button.
The depth for the reverb effect appears in the display.
fig.d-2.eps
You cannot make separate reverb effect depth settings for each individual tone. The
same depth of reverb effect will apply to all sounds.
You cannot change reverb effect depth of Session Partner, Demo songs, and Internal
song.
Adding Reverberation to Sounds (Reverb Effect)
Changing the Depth of Reverb Effect
NOTE
NOTE
FP-4-e.book 36 ページ ２００７年５月２４日 木曜日 午後７時１０分

Roland FP-4 Specifications

General

Brand	Roland
Model	FP-4
Category	Synthesizer
Language	English