Roland FP-4 User Manual

87
Settings
This sets the velocity the sound will have when the keyboard
touch is set to “OFF.”
If you turn the keyboard’s touch sensitivity “OFF,” all notes will
sound at a fixed loudness regardless of how strongly you play
the keyboard. The setting described below specifies the
loudness in this case.
1.
Press the [Function] button.
2.
Press the [Transpose] button.
3.
Hold down the [Transpose] button and use the
[-] [+] buttons to get “vEL” to appear in the
display.
fig.d-vELosity.eps
4.
Use the [-] [+] buttons to change the setting.
You can change the pitch of the Lower Tone in Dual Play (p.
29) and Split Play (p. 31) an octave at a time.
Altering the pitch in one-octave units in this way is called
“Octave Shift.”
For example, you can raise the pitch of the Lower Tone to the
same pitch of the Upper Tone in Split Play.
1.
Press the [Function] button.
2.
Press the [Split] button.
fig.d-OctShft.eps
3.
Use the [-] [+] buttons to specify the pitch of the
notes.
The range of available pitch change spans from two
octaves higher to two octaves lower.
The pitch is lowered one octave each time the [-] button
is pressed, while each press of the [+] button raises the
pitch by one octave.
To return to the original pitch, press the [-] and [+]
buttons simultaneously.
Changing the Velocity When the Key
Touch is Set to “OFF”
Setting
1–127
Changing the Pitch of the Lower Tone
in Octave Steps (Octave Shift)
Setting
-2–0–2
FP-4-e.book 87 ページ ２００７年５月２４日 木曜日 午後７時１０分

Roland FP-4 Specifications

General

Brand	Roland
Model	FP-4
Category	Synthesizer
Language	English