76
Saving a Performance
A song you’ve recorded can be saved in internal memory.
If you record a song and then turn off the power of the FP-4 without saving the song, your
recorded song will disappear. Songs that you’ve saved in internal memory will not disappear
even if you turn off the power; if you want to keep a song, you should save it in internal memory.
fig.Panel-RegistLoad.eps
1.
Record your performance (p. 66, p. 68, p. 70, p. 72).
2.
Press the [Function] button.
3.
Press the Track [1] button.
4.
Hold down the Track [1] button and use the [-] [+] buttons to get the
following display.
fig.d-Songsave.eps
5.
Use the [-] [+] buttons to select the save-destination song number.
As shown below, a dot “.” is shown following numbers in which a song has already been saved.
fig.d-001+.eps
If you select a number in which a song has already been saved, and then save your new song,
the previously saved song will be overwritten and lost. If you don’t want to delete the previously
saved song, select a number for which a dot “.” is not displayed.
Saving the Song
6.
Press the [Rec] button.
The song will be saved.
Never turn off the power while data is being saved. If you do so, the internal memory
will be destroyed, rendering it unusable.
Saving the Songs You Record
NOTE
FP-4-e.book 76 ページ ２００７年５月２４日 木曜日 午後７時１０分
To Next Page
Loading...
Need help?
General
