64
Saving Your Favorite Performance Settings
You can assign a pedal to successively switch registrations. Each time you press the
pedal, you will switch to the next registration.
Before a concert or other performance, you can save the appropriate registrations in the
order in which you’ll use them, and then step smoothly through the registrations while
you play.
fig.Panel-RegistPedal.eps
1.
Press the [Function] button.
2.
Press the [Registration] button.
3.
While holding down the [Registration] button, use the [-] [+] buttons to get
the following indication.
fig.d-RegistShift.eps
4.
Use the [-] [+] buttons to change the setting.
Using a Pedal to Switch Registrations
Setting
Description
Pressing a pedal connected to the FC2 connector or FC1 connector will not switch
registrations.
The functions assigned to the FC2 jack and FC1 jack will be available for use (p. 82).
The pedal connected to the FC2 jack can be used only for switching registrations.
In this case, the function assigned to the FC2 jack cannot be used.
The pedal connected to the FC1 jack can be used only for switching registrations.
In this case, the function assigned to the FC1 jack cannot be used.
FP-4-e.book 64 ページ ２００７年５月２４日 木曜日 午後７時１０分
To Next Page
Need help?
General
