Roland FP-50 User Manual

Panel Descriptions
Music Rest
Attach the included music rest as shown below.
Insert into the holes
Rear side
Headphone Jack
Connect your headphones (sold
separately) here.
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
* When connection cables with resistors are used, the volume level of equipment connected to the INPUT jack may be low. If this happens, use
connection cables that do not contain resistors.
USB MEMORY Port
You can use USB ash drives to do all of the following.
• Play WAV les and standard MIDI les (SMF
les) copied from your computer.
• Make audio recordings of your FP-50
performances.
• Play these audio recordings at your
computer, or burn them to CDs or other
media.
• Save/load registration sets.
• By connecting a wireless USB adapter
(WNA1100-RL; sold separately), you can
use wireless-connectivity applications,
such as the iPhone app.
* Carefully insert the USB ash drives all the way in—until it is rmly in place.
* Use a USB ash drive sold by Roland. We cannot guarantee operation if any other
USB ash drive is used.
Page 22
Page 25
Page 28
Page 30
Page 43
Front Panel
Use these buttons and
sliders to control the FP-50.
Page 6
[ ] Switch
Turns the power on
and o.
Page 13
10

Roland FP-50 Specifications

General

Brand	Roland
Model	FP-50
Category	Musical Instrument
Language	English