Roland FP-50 User Manual

Saving Performance Settings (Registrations)
Loading a Saved Registration Set (Load
Registration Set)
Load a registration set from internal memory or a USB ash drive
into the registration buttons ([1]–[4]).
* If you want to load a registration set from a USB ash drive,
connect your USB ash drive to the USB MEMORY port before
proceeding.
NOTE
Note that when you load a registration set, it will overwrite (and
erase) all of the registrations already in registration memory.
If you wish to retain your existing registrations, save them to
internal memory or a USB ash drive.
1. Press the [SONG] and [RHYTHM] buttons simultaneously.
2. Press the [ ] [ ] (SLOW/FAST) buttons to select
“LoadRgst.”
3. Press the [METRONOME] button.
4. Press the [–] [+] buttons to select the destination memory.
Display Explanation
U (User) Internal memory
S (USB) USB ash drive
5. Press the [ ] (FAST) button.
6. Use the [–] [+] buttons to select the registration set you
want to load.
7. Press the [METRONOME] button.
A conrmation message appears.
If you decide to cancel, press the [ ] (SLOW) button.
8. Press the [ ] (FAST) button.
The registration set will be loaded into buttons [1]–[4] .
NOTE
Do NOT turn o the power while “Working.” is displayed.
9. Press the [SONG] and [RHYTHM] buttons simultaneously
to nish.
Copying a Saved Registration Set (Copy
Registration Set)
You can copy saved registration sets from internal memory to a USB
ash drive, or from a USB ash drive to internal memory.
1. Connect a USB ash drive (sold separately) to the USB
MEMORY port (p. 10).
2. Press the [SONG] and [RHYTHM] buttons simultaneously.
3. Press the [ ] [ ] (SLOW/FAST) buttons to select
“CopyRgst.”
* The following steps are not available if there are no registration
sets saved in internal memory,or if there is no USB ash drive is
connected.
4. Press the [METRONOME] button.
5. Use the [–] [+] buttons to select the copy source and
destination memory locations.
Display Explanation
U
S
Copy from internal memory to a USB ash drive.
S
U
Copy from a USB ash drive to internal memory.
6. Press the [ ] (FAST) button.
7. Use the [–] [+] buttons to select the registration set to be
copied.
If you select “ALL,” all registration sets will be copied.
The registration sets will be copied to numbers in which no
registration set is saved, starting with the number you selected as
the copy-destination.
31
Operation Guide Getting Ready Performing Recording Registrations Settings
Appendix

Roland FP-50 Specifications

General

Brand	Roland
Model	FP-50
Category	Musical Instrument
Language	English