Roland GO:KEYS 5 Reference Manual

67
Editing the system settings
Parameter Value Explanation
Delay Left
(msec) 1–1300 [msec]
Adjusts the time until the left delay
sound is heard.
Delay Left
(note)
Note
Ø “Note” (p. 75)
Sync Right OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
Ø “Changing the tempo (TEMPO)” (p. 36)
Delay Right (msec) 1–1300 [msec]
Adjusts the time until the right delay
sound is heard.
Delay Right
(note)
Note
Ø “Note” (p. 75)
Phase Left
NORMAL, INVERSE
Phase of left and right delay sound
NORMAL: Non-inverted
INVERT: Inverted
Phase Right
Feedback Mode NORMAL, CROSS
Selects the way in which delay sound is
fed back into the effect. (See the figures
above.)
HF Damp
200, 250, 315, 400,
500, 630, 800,
1000, 1250, 1600,
2000, 2500, 3150,
4000, 5000, 6300,
8000, BYPASS [Hz]
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don’t want to filter out any
high frequencies, set this parameter to
BYPASS.
Low Gain -15–+15 [dB]
Amount of boost/cut for the low-
frequency range
High Gain -15–+15 [dB]
Amount of boost/cut for the high-
frequency range
Level 0–127 Output Level
54 54 Mod DelayMod Delay
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
R out
L out
Balance W
Feedback
Feedback
Balance D
Balance D
L in
R in
Balance W
2-Band EQ
2-Band EQ
Delay Modulation
Delay Modulation
When Feedback Mode is CROSS:
R out
L out
Balance W
Feedback
Feedback
Balance D
Balance D
L in
R in
Balance W
2-Band EQ
Delay
Delay Modulation
2-Band EQ
Modulation
Parameter Value Explanation
Feedback -98–+98 [%]
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative
(-) settings will invert the
phase.
Balance
D100: 0W–D0:
100W
Volume balance between the direct
sound
(D) and the delay sound (W)
55 55 2Tap PanDly2Tap PanDly
R out
L out
Balance W
Balance W
Balance D
Balance D
L in
R in
Delay 1
Feedback
Delay 2
Double Tap
Delay
Double Tap
Delay
Parameter Value Explanation
Delay Feedback -98–+98 [%]
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative
(-) settings will invert the
phase.
Balance
D100: 0W–D0:
100W
Adjusts the volume balance between
the sound that is sent through the
delay
(W) and the sound that is not sent
through the delay
(D).
56 56 3Tap PanDly3Tap PanDly
Produces three delay sounds; center, left and right.
R out
L out
Balance W
Center Tap
Balance W
Feedback
Balance D
Balance D
L in
R in
Left Tap
Right Tap
2-Band EQ
2-Band EQ
Triple Tap
Delay
Parameter Value Explanation
Center Feedback -98–+98 [%]
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative
(-) settings will invert the
phase.
Balance
D100: 0W–D0:
100W
Volume balance between the direct
sound
(D) and the delay sound (W)

Roland GO:KEYS 5 Specifications

General

Brand	Roland
Model	GO:KEYS 5
Category	Electronic Keyboard
Language	English