68
Editing the system settings
57 57 4Tap PanDly4Tap PanDly
This eect has four delays.
R out
L out
Balance W
Balance W
Balance D
Balance D
Delay 2
Delay 3
L in
R in
Feedback
1
L
2 3
4
R
Delay 1
Delay 4
Quadruple
Tap Delay
Parameter Value Explanation
Delay 1 Feedback -98–+98 [%]
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative
(-) settings will invert the
phase.
Balance
D100: 0W–D0:
100W
Volume balance between the direct
sound
(D) and the delay sound (W)
58 58 MultiTapDlyMultiTapDly
This eect provides four delays. Each of the Delay Time parameters can
be set to a note length based on the selected tempo. You can also set
the panning and level of each delay sound.
R out
L out
Balance W
Balance W
Balance D
L in
Balance D
Delay 1
Feedback
Delay 2
Delay 3
Delay 4
R in
Multi Tap
Delay
2-Band EQ
2-Band EQ
Parameter Value Explanation
Delay 1 Feedback -98–+98 [%]
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative
(-) settings will invert the
phase.
Balance
D100: 0W–D0:
100W
Volume balance between the direct
sound
(D) and the effect sound (W)
59 59 Reverse DlyReverse Dly
This is a reverse delay that adds a reversed and delayed sound to the
input sound. A tap delay is connected immediately after the reverse
delay.
R out
L out
L in
D1
Rev
D2D3
Feedback
R in
Rev. Delay
2-Band
EQ
2-Band
EQ
Delay
Parameter Value Explanation
Rev Delay
Feedback
-98–+98 [%]
Proportion of the delay sound that is to
be returned to the input of the reverse
delay negative
(-) values invert the
phase)
Balance
D100: 0W–D0:
100W
Volume balance between the direct
sound
(D) and the delay sound (W)
60 60 TimeCtrlDlyTimeCtrlDly
A stereo delay in which the delay time can be varied smoothly.
R out
L out
Balance W
Balance W
Feedback
Feedback
Balance D
Balance D
L in
R in
2-Band EQ
2-Band EQ
Time Ctrl
Delay
Time Ctrl
Delay
Parameter Value Explanation
Feedback -98–+98 [%]
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative
(-) settings will invert the
phase.
Delay Time
(msec)
1–1300 [msec]
Adjusts the delay time from the direct
sound until the delay sound is heard.