Roland OCTAPAD SPD-20 PRO User Manual

10
Attaching to a Stand
If you want to play the OCTAPAD with a stand, use a pad stand (PDS-10 or PDS-20; sold separately).
* You must use the screws on the bottom panel of the OCTAPAD Using any other screws may cause malfunction.
* Do not use the screws included in the PDS-10 (old model).
* When turning the unit over, be careful so as to protect the buttons and pads from damage. Also, handle the unit carefully; do not drop it.
1. Using the screws on the bottom of the OCTAPAD, attach the PDS-10 or PDS-20 mounting plate.
* Do not use the screws included with the pad stand.
bottom of OCTAPAD
2. Attach the OCTAPAD to the pad stand.
For the details on how to assemble the pad stand and use the mounting plate, refer to the owner’s manual of the pad stand.

Roland OCTAPAD SPD-20 PRO Specifications

General

Brand	Roland
Model	OCTAPAD SPD-20 PRO
Category	Drums
Language	English