Roland OCTAPAD SPD-20 PRO User Manual

20
Recalling Kits in a Specic Order
You can register and recall kits in the order in which you plan to use
them. This is called the Kit Chain function. If you register kits in the
order in which you will be using them in your live performance, you
can instantly recall the next kit to use. Up to 16 kits can be registered
in one kit chain.
Up to 16 kit chains can be stored in the banks (A–P).
BANK A
Kit Chain
STEP1 STEP2 STEP3 STEP16
BANK P
STEP1 STEP2 STEP3 STEP16
STEP1 STEP2 STEP3 STEP16
Kit Chain
Kit Chain
BANK B
Creating a Kit Chain
1. Hold down the [SHIFT] button and press the [KIT
CHAIN] button.
The [KIT CHAIN] button blinks.
2. Use the [K][J] buttons to select the bank (A–P) in
which you want to store the chain.
3. Press the [ENTER] button.
4. Use the [K][J] buttons to select a step (1–16).
5. Use the [–][+] buttons to select the kit that you
want to assign to the selected step.
If you don’t want to use all the steps to step 16, select “END.”
Using a Kit Chain
1. Press the [KIT CHAIN] button.
The [KIT CHAIN] button lights.
2. Use the [K][J] buttons to select a bank (A–P).
3. Use the [–][+] buttons to switch steps.
The assigned kit is selected.

Roland OCTAPAD SPD-20 PRO Specifications

General

Brand	Roland
Model	OCTAPAD SPD-20 PRO
Category	Drums
Language	English