Roland TR-6S User Manual

34
Initializing, Backing-Up, Restoring
Restoring Data That Was Backed Up to SD Card
(RESTORE)
1. Insert the SD card into the TR-6S.
2. Press the [UTILITY] button to make it light.
The UTILITY screen appears.
3. Use the [VALUE] knob to select “UTILITY: Restore.”
4. Press the [VALUE] knob.
The RESTORE screen appears.
5. Use the [VALUE] knob to select the file that you
want to restore.
6. Press the [VALUE] knob.
A confirmation message appears.
7. To execute, use the [VALUE] knob to select “O K ,”
and press the [VALUE] knob.
If you decide to cancel, use the [VALUE] knob to select “Cancel,” and
then press the [VALUE] knob.
8. When the display indicates “Completed. Turn off
p owe r.” turn the TR-6S’s power off and on again.

Roland TR-6S Specifications

Power

current draw	500 mA
battery capacity	1, 900 mAh

Battery

ni-mh battery configuration	AA, HR6 x 4
alkaline battery configuration	AA, LR6 x 4
ni-mh battery life	Approximately 5.5 hours
alkaline battery life	Approx. 4.5 hours

Weight and Dimensions

dimensions	224 (W) x 132 (D) x 61 (H) mm
dimensions (inches)	8-13/16 (W) x 5-3/16 (D) x 2-3/8 (H)
weight (including batteries)	705 g
weight (including batteries in pounds)	1 lb 9 oz